Southwest Medical

Symmetry is built with plenty of room in front of the seat so you could get in and out easily. We built it so you can transfer onto a flat surface, instead of one that slopes forward. The seat is smooth on the front edge so you can slide across it without any bulky hardware in your way. We eliminated the tubes on the outside of the lower base frame so you can roll up close to self transfer or easily be transferred with a patient lift.

When looking at the mechanics of a solid seat standing system, it was easy to see that careful attention had to be paid to the pivot points of the seating system. Instead of using an under seat hydraulic lift with a seat that hinged from a fixed pivot point, Symmetry is designed with lift arms that pull the system up and forward smoothly. This Over-Center-Seat stands you fully upright and slides with your body, not against it. Our Sliding-Seat dramatically reduces shear and decreases spasms by maintaining the position of your body on the seat and minimizing pressure as you stand.

Special attention was given to the backrest and the positioning devices that are needed by many clients to support them to sit or stand correctly. Our development process made sure that the back stays with you as you move to your standing position and back to seated. The design of Symmetry makes sure that contact is made to supply the support that you need in the areas that you need it. Every back that we supply is standard with our Adjustable-Sliding-Back system. This system is fully adjustable to allow you to personalize each unit to the individual needs of the client. With this product, any individual supports you may need to help you stand properly will stay in place from sitting to standing, supporting you the way that they were meant to and the way you would expect them to.

Youth Size (3'6" - 5'6") 150 pounds. Adult Size (5' - 6'5") 250 pounds.

It's time YOU stood in Symmetry!

The High Density Quickie Wheelchair Full Length Arm Pads fit or replace Quickie full length (14-15 inch length) armrest pads using your existing screws. The high density foam is more comfortable and longer lasting. Definite upgrade for any wheelchair arm pad. They have a black base/upholstery color and are only available in black.

In addition to Quickie, these full length wheelchair arm pads will also fit many Ki Mobility, TiLite, Invacare, Everest Jennings, and Tuffcare wheelchairs. If youre installing on a non-Quickie wheelchair, we recommend ordering mounting screws.

These High Density Quickie Wheelchair Full Length Arm Pads are in stock now and ready to ship fast! A single order will get a pair (left and right) of arm pads without mounting screws. Replacement mounting screws can be added for an additional charge.

Action classic contour cushion is designed for users with a high risk of pressure ulcers and/or a need for positioning. The (9/16)" thick polymer cube pad is attached to a contoured foam base covered in an incontinent film.

Wedged cushion measures 4(1/2)" high on the sides and at the center pummel and 2(11/16)" at the back. Leg troughs are 3(5/16)"inches high. Includes Body Smart low shear cover.

Note: One of more of the raw materials used to manufacture the Akton polymer used in this product has a naturally-occurring scent that may be noticeable to varying degrees (weak to strong) in the finished goods. This is typical. The scent should dissipate over time. Scent should noticeably decrease within 10 to 15 days. The best method to dissipate the odor is to air out the products unrolled and outside original packaging in a ventilated space.

The Model IGAT-180/135 meets all of the new recommendations and pending requirements of the Americans with Disabilities Act (ADA) for in-ground pools and spas with built-in benches. It is user-operable, and its seat height is easily adjustable to accommodate various wheelchair heights. The 135 degree clockwise turn allows the greatest access from the deck for the user and any assistants. Side-to-side transfers are easy, the footrest flips up and the mounting arm is under the seat. This allows for unobstructed transfer. The seat rotates forward when entering the pool, and backward when exiting the water. The standard seat has a right arm only, but a flip-up outer arm is available. All components required for installation and operation are included in the price and ship with the lift, although many additional options are available.