Southwest Medical

Adapt Lubricating Deodorant was formulated exclusively for use in ostomy pouches as both a pouch lubricant and an odor neutralizer. Won't degrade pouch seals, has been tested extensively for safety and efficacy, and is clear to avoid staining. Lubrication eases emptying by not allowing fecal matter to stick to the inside of the pouch, and it helps prevent pouch static and sticking.

NiteTrain'r is a moisture-sensing device for children who wet. It consists of a small plastic alarm box that attaches to the shoulder area of the child's pajama or tee shirt close to the ear and a nonabsorbent sensor pad worn over the genitals and held in place (INSIDE the underwear) with a pair of snug-fitting shorts or panties. The plastic box unit contains a miniaturized electronics alarm and a 9-volt battery. NiteTrain'r has a built-in dual-volume control switch for the alarm (high/low). NOTE: Specify male or female when ordering.

Included with every alarm are instructions for use, a progress chart and two moisture-sensing pads. (Two male or two female) One 9V battery included. Additional sensors are available in our accessories section.

The large sensor pad worn inside the underwear can be uncomfortable for smaller children. Two sensor pads may not be adequate for children who wet multiple times a night, so you may want to purchase a spare.

HOW DOES IT WORK Place the moisture-sensitive pad into snug fitting underwear, with the wide area of the pad in front. the holes in the pad should be in contact with body, so they can detect and hold the signs of wetness.

ALARM: The alarm will sound when plugging it in, to let you it is working. At that time you can set the alarm to a high or low sound.

Stealth Seat Back headrest mount. Compatible with HMO400, HMO475, TWB485 and other 1/2" square bar headrests.

Mounts to wheelchair solid backrests. Ottobock Style Bolt Pattern for Seat Back Mount.

Varilite cushion valve replacement is available in either Standard Valve or PSV Valve. Kit includes replacement valve, adhesive, and installation instructions.

Pressure Setting Valve (PSV) : The PSV is marked with three pre-set positions, which provide the best range of immersion for most users. Positions 1,2,and 3 are setings that determine the amount of immersion. Setting one is the least and setting 3 is the most.

Standard Valve for Adjusting Air Volume Sitting on a fully inflated cushion, the user opens the valve and releases air, closing the valve when sitting on approximately 1/2 inch (13 mm) of air and foam.