NiteTrain'r is a moisture-sensing device for children who wet. It consists of a small plastic alarm box that attaches to the shoulder area of the child's pajama or tee shirt close to the ear and a nonabsorbent sensor pad worn over the genitals and held in place (INSIDE the underwear) with a pair of snug-fitting shorts or panties. The plastic box unit contains a miniaturized electronics alarm and a 9-volt battery. NiteTrain'r has a built-in dual-volume control switch for the alarm (high/low). The moisture-sensing pad may be uncomfortable to wear. NOTE: Specify male or female when ordering.
Included with every alarm are instructions for use, a progress chart and two moisture-sensing pads. (Two male or two female) One 9V battery included. Additional sensors are available in our accessories section.
The large sensor pad worn inside the underwear can be uncomfortable for smaller children. Two sensor pads may not be adequate for children who wet multiple times a night, so you may want to purchase a spare.
HOW DOES IT WORK
Place the moisture-sensitive pad into snug fitting underwear, with the wide area of the pad in front. the holes in the pad should be in contact with body, so they can detect and hold the signs of wetness.
ALARM: The alarm will sound when plugging it in, to let you it is working. at that time you can set the alarm to a high or low sound.
|Alarm Type: Sound||2 set volumes|
|Sensor||2 sensors included (specify male or female)|
|Battery||1 x 9 volt alkaline|
|Alarm Dimensions: Alarm box||2 x 2.5 x 0.75 inches|
|Sensor Dimensions:||Sensor wire - 25 inches long; Boys Sensor - 6.6 x 3.7 (at widest point) x 0.1 inches; Girls Sensor - 6.6 x 2.9 (at widest point) x 0.1 inches|