Measure from front frame to floor.

Older pediatric users and many adults with changing conditions are increasingly requesting a stay-in-your-seat transit option for their rigid chairs. To meet this growing need, the Quickie Q7 now features a WC19 transit approved tie down system that accommodates weight capacities up to 265 lbs.

Frame Inset is the distance fromthe outside of the seat tube to the outside of the footrest.

Measurement for set up

For new Quickie Q7 users who want the narrow, more angular, front-end access they experienced on their older Quickie GT chairs, the Quickie Q7 now features an additional narrow (position 3) caster setting.

Depth Adjust Backrest extends the frame rear of the seat sling, select a factory setting.

Measure from outside of seat tube to the outside of opposite seat tube.

Measure from font of back post to front edge of seat sling. Seat sling is 1

2" Foam Cushion

Measure from the front of the seat rail to the floor.

3" Micro

Multi Position Fork

Platform Flip Up Footplate

Wear Covers

The Q7 backrest bracket now features additional backrest hardware for increased strength in a commonly adjusted and highly stressed area. CNC machined nuts use special high stress materials with exacting tolerances. They are specifically designed to withstand repeated high stress loads. This is why we use two of them to ensure the Quickie Q7 backrest stays firmly attached to the frame.

The bolt-on push handle receivers now extended further rearward to accommodate aftermarket backrests.

Marines Patch

The Quickie Q7 center-of-gravity adjustment system is now available in two adjustment ranges: 0

Measure from front of back post to the center of rear axle.

Quick Release Axle

Mag wheel: 20,22, or 24in

Quickie Q7 Presta valve tires have now switched over to Schrader valves. Many users requested this change because they feel the Schrader valve fits a greater number of after market pumps and is easier to attach to the pump. Also, Schrader valves are now available on high pressure tires.

Aluminum Anodized

The new Padded Swing Away Armrest receivers now have thicker walls and feature a new positioning bolt made with H1150 conditioned hardened steel. This combination significantly increases the amount of load that can be placed on each armrest.

High Mount Push - Open

The curved handle push-to-lock wheel lock is designed to help users with more limited hand dexterity easily grip the handle. For some individuals however, this design places the handle too far from the body in the locked position. To accommodate these users, a new ergonomically designed wheel lock extension handle is available to move the handle closer to the user.

Plastic Side Guard Standard

2" Aircraft Buckle Positioning Belt

Quickie Black Spoke Guard

Black/Charcoal Adult Backpack

Tool Kit

Lime green, Blue, Purple, Red, Gold, Ti Grey, and Black