TiLite TX Series 2 - Discontinued
|Unit of Measure:||Ea|
The TiLite TX is now discontinued. It has been replaced by the TiLite 2GX Series 2.
Each TX begins life in our Designs Unlimited Studio, where we draw the frame to each users individual specifications. Next, TiLite fabricators and welders bring the drawings to life by hand building the TXs 1.00 dual-tube titanium frame to exacting standards. Finally, before each TX leaves the TiLite factory in Washington State, we carefully assemble and inspect it to ensure that it matches precisely what our customer has ordered. Each TX is like no other TX.
One-Piece Side Frames
TiLite builds the TX with one-piece side frames. We also build our rigid chairs with one-piece side frames. Other manufacturers build their folding chairs with two- or three-piece side frames that are bolted together, leading to flex, squeaks and loss of energy. One-piece side frames increase performance by reducing flex and increasing durability.
Rigid Folding Mechanism
The TX features TiLites exclusive Rigid Folding Mechanism cross tube design RFM. The RFM cross tubes permit TiLite to use one-piece side frames. This innovation increases performance and enhances durability because the side frames are welded together - not bolted. In addition, RFM cross tubes secure to the bottom frame tube by clamping over it. This keeps the bottom pivot point in line with the frame, allowing the chair to fold as narrowly as possible.
Snap-In Seat Saddles
TiLites RFM cross tubes also feature snap-in seat saddles that lock the cross tubes into place, helping the TX achieve rigid chair performance.
Bullet Caster Housing
TiLites exclusive Bullet Caster Housing was created by designing an integral frame component with two goals in mind; low weight and elegant looks. Like many of TiLites innovations, the Bullet Caster design reduces the weight of the chair. Sometimes simple really is better.
Machined Camber Plugs
The TiLite TX utilizes machined plugs to create rear wheel camber. Other manufacturers use washers to create rear wheel camber. The use of machined camber plugs precisely aligns the TXs rear wheels, allowing the chair to consistently track straight.
The TiLite TX is now available with a Satin or Polished titanium finish or in one of 17 painted frame colors. Whether you are looking for subtle, bright, or just plain cool, now there is a TiLite look for you. Mix and match TiLites frame and accessory colors on our Color Configurator.
|Chair Weight:||12.3 lbs.|
|Center of Gravity:||Adjustable|
|Front Wheel Angle:||Fixed|
|Seat Width:||12" - 20"|
|Seat Depth:||14" - 20"|
|Front Seat Height:||15" - 21"|
|Rear Seat Height:||14" - 19"|
|Seat Back Type:||Fixed Seat Back|
|Adj. Height 12" to 20"|
|Fixed Height 8" to 20"|
|Fixed Angle 85° to 100°|
|Camber:||0°, 2°, 4°, 6° or 8°|
|Front Frame Angle:||70°, 80° or 85°|
|Overall Rating:||0 Reviews|
Be the first to review this product, add your review today!